Shorten Cycle Times – Reduce Part Costs
Economic success in plastics processing is achieved only when cycle times are minimized, product quality remains consistently high, and scrap rates are kept low.
Standard and Customized Water-Based Temperature Control Units with Temperature Range 10–90 °C
High flow rate up to 6.2 m³/h
High pump pressure up to 6.3 bar
Large connection diameters up to 1 inch
parts in contact with media made of stainless steel / gunmetal
Scope of Delivery
Ready-to-connect unit with microprocessor control
Integrated level and temperature monitoring
Interface for connection to the RHYTEMPER® central control unit
Technical Specifications
| max. Water Supply Temperature | up to 90 °C |
| Heating Capacity | 6 - 8 kW |
| Cooling Capacity Direct / Indirect ( at ΔT=70K) | 80 kW |
| Max. Pump Pressure | 6,3 bar |
| Max. Pump Flow Rate | 6,2 m³/h |
| Operating Voltage | 400 V AC /3 ~PE/ 50 Hz | Special voltages available on request |
| Consumer Circuit Connections | 1 inch |
| Cooling Circuit Connections | ¾ inch |
| Dimensions: | |
| Length: | 702mm |
| Width: | 260mm |
| Height: | 650mm |
| Empty Weight | 100 - 150 kg |
ONI Rhytemper® Systems and Accessories
ONI Rhytemper for injection molding
ONI Rhytemper for Die Casting
Shorten Cycle Times – Reduce Part Costs
Lasting economic success in die casting can only be ensured when cycle times are minimized, product quality remains consistently high, and scrap rates are virtually eliminated.
Rhytemper Accessories
Perfectly Matched Accessories for ONI Temperature Control Systems.
Filter Units
Mold Drainage Systems